Ubuntu 10.10 Server : How to run Cisco IOS 15.1 on dynamips (GNS3)

Here’s how to fly an ISO 15.1 on dynamips.

# tail -1 /etc/lsb-release DISTRIB_DESCRIPTION="Ubuntu 10.10" # uname -r 2.6.35-28-server # dynamips --version Cisco Router Simulation Platform (version 0.2.8-RC2-amd64) # gns3 --version gns3 0.7

[ prepare an IOS for Cisco 7206VXR ]

I used c7200-adventerprisek9-mz.151-4.M.bin

plz note that not c7200p images! In my testing , these images don’t seem to boot.

[ configure GNS3 to fly IOS 15.1 ]

select c7200-adventerprisek9-mz.151-4.M.bin as a boot ISO image


If you haven’t installed dynamips , just tyep

# apt-get install gns3 dynamips

General:

Midplane is vxr and NPE is npe-400.


Memories n’ disks setting is default.




add a module on slot1

[ fly R1(c7200) via GNS3 ]

calculate n’ set IDLEPC value.


IOS 15.1 is running

# cat .gns3/gns3.ini [GUIState] Geometry=@ByteArray(\x1\xd9\xd0\xcb\0\x1\0\0\0\0\0\x98\0\0\x1\x92\0\0\x3\xb5\0\0\x3\x9b\0\0\0\x98\0\0\x1\x92\0\0\x3\xb5\0\0\x3\x9b\0\0\0\0\0\0) State=@ByteArray(\0\0\0\xff\0\0\0\0\xfd\0\0\0\x3\0\0\0\0\0\0\x1\0\0\0\x1\xb3\xfc\x2\0\0\0\x2\xfb\0\0\0(\0\x64\0o\0\x63\0k\0W\0i\0\x64\0g\0\x65\0t\0_\0N\0o\0\x64\0\x65\0T\0y\0p\0\x65\0s\x1\0\0\0\x41\0\0\x1\xb3\0\0\0g\0\xff\xff\xff\xfb\0\0\0&\0\x64\0o\0\x63\0k\0W\0i\0\x64\0g\0\x65\0t\0_\0U\0n\0\x64\0o\0V\0i\0\x65\0w\0\0\0\0\0\xff\xff\xff\xff\0\0\0g\0\xff\xff\xff\0\0\0\x1\0\0\x1\0\0\0\x1\xb3\xfc\x2\0\0\0\x1\xfb\0\0\0$\0\x64\0o\0\x63\0k\0W\0i\0\x64\0g\0\x65\0t\0_\0T\0o\0p\0o\0S\0u\0m\x1\0\0\0\x41\0\0\x1\xb3\0\0\0l\0\xff\xff\xff\0\0\0\x3\0\0\x1\x12\0\0\0\xd9\xfc\x1\0\0\0\x1\xfb\0\0\0$\0\x64\0o\0\x63\0k\0W\0i\0\x64\0g\0\x65\0t\0_\0\x43\0o\0n\0s\0o\0l\0\x65\x1\0\0\x1\x6\0\0\x1\x12\0\0\0O\0\a\xff\xff\0\0\x1\x12\0\0\0\xd4\0\0\0\x1\0\0\0\x2\0\0\0\x1\0\0\0\x2\xfc\0\0\0\x1\0\0\0\x2\0\0\0\x3\0\0\0\x1e\0t\0o\0o\0l\0\x42\0\x61\0r\0_\0G\0\x65\0n\0\x65\0r\0\x61\0l\x1\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\"\0t\0o\0o\0l\0\x42\0\x61\0r\0_\0\x45\0m\0u\0l\0\x61\0t\0i\0o\0n\x1\0\0\x1\\\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x1e\0t\0o\0o\0l\0\x42\0\x61\0r\0_\0\x64\0r\0\x61\0w\0i\0n\0g\x1\0\0\x2L\xff\xff\xff\xff\0\0\0\0\0\0\0\0) [GNS3] version=1792 lang=en project_startup=true relative_paths=true slow_start=0 console= use_shell=true gui_show_status_points=true gui_use_manual_connection=false gui_draw_selected_rectangle=false project_directory=/home/hattori/.gns3 ios_directory=/home/hattori/.gns3 scene_width=2000 scene_height=1000 [Dynamips] hypervisor_path=/usr/bin/dynamips hypervisor_port=7200 hypervisor_baseUDP=10000 hypervisor_baseConsole=2000 hypervisor_working_directory=/tmp clean_working_directory=true dynamips_ghosting=true dynamips_sparsemem=false dynamips_mmap=true hypervisor_memory_usage_limit=512 hypervisor_udp_incrementation=100 hypervisor_manager_import=true hypervisor_manager_binding=localhost [Qemu] qemuwrapper_path= qemuwrapper_working_directory= qemu_path=qemu qemu_img_path=qemu-img external_hosts=localhost:10525 enable_QemuManager=true qemu_manager_import=true qemu_manager_binding=localhost qemuwrapper_port=10525 qemuwrapper_baseUDP=20000 qemuwrapper_baseConsole=3000 default_pix_image= default_pix_memory=128 default_pix_nic=e1000 default_pix_options=-nographic default_pix_kqemu=false default_pix_key="0x00000000,0x00000000,0x00000000,0x00000000" default_pix_serial=0x12345678 default_junos_image= default_junos_memory=96 default_junos_nic=e1000 default_junos_options= default_junos_kqemu=false default_junos_kvm=false default_asa_memory=256 default_asa_nic=e1000 default_asa_options="-hdachs 980,16,32" default_asa_kqemu=false default_asa_kvm=false default_asa_kernel= default_asa_initrd= default_asa_kernel_cmdline="auto console=ttyS0,9600 bigphysarea=16384 ide1=noprobe" default_ids_image1= default_ids_image2= default_ids_memory=512 default_ids_nic=e1000 default_ids_options="-smbios type=1,product='IDS-4215'" default_ids_kqemu=false default_ids_kvm=false [Capture] working_directory=. capture_reader_cmd=/usr/bin/wireshark %c auto_start_cmd=true [IOS.images] 15\filename=/home/hattori/c7200-adventerprisek9-mz.151-4.M.bin 15\chassis=7200 15\platform=c7200 15\hypervisors= 15\default_ram=256 15\idlepc=0x638617b4 15\default=true

# pwd /home/hattori/.gns3/test/test_working # ls c7200-adventerprisek9-mz.151-4.M.bin-localhost.ghost c7200_R1_bootflash c7200_R1_disk0 c7200_R1_lock c7200_R1_log.txt c7200_R1_nvram c7200_R1_rommon_vars c7200_ghost-c7200-adventerprisek9-mz.151-4.M.bin-localhost.ghost_bootflash c7200_ghost-c7200-adventerprisek9-mz.151-4.M.bin-localhost.ghost_disk0 c7200_ghost-c7200-adventerprisek9-mz.151-4.M.bin-localhost.ghost_log.txt c7200_ghost-c7200-adventerprisek9-mz.151-4.M.bin-localhost.ghost_nvram